This manual is for 5th Wheel applications only․ Level-Up is an Automatic Leveling system that comes installed in either a 4-point or 6-point configuration․ See Plumbing Diagrams for additional information․ The Level-Up hydraulic system is equipped with 14K aluminum landing gear and 8K aluminum․
Introduction
Welcome to the Lippert 6 Point Leveling System Manual․ This manual provides comprehensive instructions and information for operating and maintaining your Lippert 6 Point Leveling System, designed to enhance your RVing experience by ensuring a stable and level setup at your campsite․ This system offers an automated solution for leveling your 5th wheel trailer, simplifying the process and minimizing the effort required to achieve a comfortable and secure parking position․ The 6 Point Leveling System utilizes a network of powerful hydraulic jacks strategically positioned to provide precise control over your trailer’s orientation․ This advanced system incorporates intuitive controls, allowing you to easily activate the leveling process with a simple push of a button․ The system seamlessly adjusts the jacks to achieve a level and stable platform, ensuring a comfortable and secure experience for you and your passengers․ This manual is your guide to understanding the capabilities of your Lippert 6 Point Leveling System, enabling you to maximize its benefits and enjoy a smooth and enjoyable RVing experience․
System and Safety Information
The Lippert 6 Point Leveling System is a powerful tool that requires careful use and understanding to ensure safe and proper operation․ This section outlines essential safety precautions and system information to help you operate your leveling system safely and effectively․ Before operating the Lippert 6 Point Leveling System, it is crucial to familiarize yourself with the control panel and understand the functions of each button․ Always ensure that the trailer is parked on a reasonably level surface before activating the leveling system․ Never operate the system while individuals, pets, or objects are within the range of movement of the jacks․ When operating the system, it is essential to remain attentive and observe the movement of the jacks․ If you notice any unusual noises or behaviors, immediately stop the system and investigate the cause․ Avoid extending the jacks beyond their recommended limits․ Overextending the jacks can damage the system and create unsafe conditions; The Lippert 6 Point Leveling System should only be used for its intended purpose of leveling the trailer․ Do not use the system for any other purpose, such as lifting or supporting heavy objects․ Regularly inspect the jacks and components for signs of wear or damage․ Replace any damaged parts immediately․ Always refer to the troubleshooting section of this manual if you encounter any problems or malfunctions․
Operation
The Lippert 6 Point Leveling System offers an intuitive and user-friendly interface for both automatic and manual operation․ To activate the automatic leveling sequence, press the AUTO LEVEL button on the control panel․ The system will automatically extend and retract the jacks to achieve a level position․ The control panel features a clear LCD display that provides real-time feedback on the system’s status, including jack extension and retraction progress, as well as any error codes or warnings․ The system includes a manual override feature that allows you to control the jacks individually using the control panel buttons․ This feature is helpful in situations where the automatic leveling sequence fails or if you prefer to manually fine-tune the trailer’s level․ The system also includes a safety feature that automatically stops the jacks if they encounter an obstacle or reach their maximum extension limit․ This safety feature helps to prevent damage to the system and ensures safe operation․ To turn off the leveling system, simply press the ON/OFF button on the control panel․ The system will shut down and retract the jacks to their resting position․ It is important to always follow the instructions in this manual and consult with a qualified technician if you encounter any difficulties or require further assistance․
5th Wheel Operation
The Lippert 6 Point Leveling System is specifically designed for 5th wheel trailers, providing a smooth and efficient leveling experience․ When operating in a 5th wheel configuration, the system utilizes a combination of six hydraulic jacks strategically placed to achieve optimal stability and level․ These jacks are controlled by an intuitive touch panel interface, offering both automatic and manual leveling capabilities․ The auto-level function uses sensors to determine the trailer’s orientation and automatically extends and retracts the jacks to achieve a level position․ For precise control, the manual override allows you to adjust individual jacks to fine-tune the trailer’s level․ This system is equipped with safety features that prevent over-extension, ensuring the protection of both the system and your trailer; To ensure safe operation, always follow the instructions in this manual and consult a qualified technician if you encounter any difficulties or require further assistance․ The Lippert 6 Point Leveling System simplifies the process of leveling your 5th wheel trailer, allowing you to enjoy a comfortable and stable camping experience․
Auto Level
The Lippert 6 Point Leveling System simplifies the leveling process with its intuitive auto-level feature․ This automated function eliminates the need for manual adjustments, ensuring a smooth and efficient leveling experience․ When activated, the system utilizes built-in sensors to analyze the trailer’s orientation and determine the necessary adjustments․ The system then automatically extends and retracts the six hydraulic jacks, strategically positioned to achieve a perfectly level position․ The auto-level feature is designed to be user-friendly, requiring minimal input from the operator․ Simply engage the function, and the system will take care of the rest, ensuring a stable and comfortable camping experience․ The auto-level function is a valuable asset for RVers of all skill levels, simplifying the leveling process and minimizing the risk of errors․
Auto Level Sequence
The Auto Level Sequence in the Lippert 6 Point Leveling System employs a systematic approach to achieve a perfectly leveled trailer․ The process begins with the front of the trailer lowering slightly, creating a position below level․ This initial adjustment sets the stage for the subsequent leveling actions․ Next, the rear jacks are grounded, providing a stable foundation for the trailer․ The system then embarks on a side-to-side leveling sequence, meticulously adjusting the jacks to ensure a balanced and even platform․ Notably, in the 6 Point System, two middle jacks are grounded during this phase, serving to stabilize the trailer and prevent unwanted movement․ These middle jacks are not directly involved in the leveling process but act as crucial support elements․ The Auto Level Sequence culminates with the trailer reaching a perfectly level state, ready for a comfortable and enjoyable stay․ The system’s precision and efficiency make the leveling process a breeze, allowing RVers to focus on enjoying their time on the road․
Manual Operation
The Lippert 6 Point Leveling System offers a manual override feature, providing an alternative leveling method in case of electrical or system failures․ To initiate manual operation, disconnect the hydraulic power unit motor from the main power source, which can be either the battery or shore power․ This step is crucial to ensure safety during the manual override procedure․ The manual override process involves utilizing an electric drill to extend and retract the jacks, effectively bypassing the automated system․ The manual override procedure allows for precise control over the leveling process, enabling RVers to adjust the trailer’s position according to their specific needs․ This feature provides peace of mind, knowing that even in the event of a system malfunction, they can still achieve a level and stable trailer․ Lippert’s manual override feature demonstrates the company’s commitment to providing reliable and adaptable leveling solutions, empowering RVers to navigate various situations with confidence․
Troubleshooting
When encountering issues with your Lippert 6 Point Leveling System, a methodical approach to troubleshooting can help pinpoint the problem․ Start by checking for simple solutions like a dead battery, as this can often be the culprit․ If the battery is charged, consider whether the jacks have been extended too far, as excessive extension can strain the system․ Next, examine the fuses, as a blown fuse can prevent the system from functioning․ Should these basic checks not resolve the issue, further investigation is necessary․ Inspect the hydraulic system for any leaks, which can indicate a compromised seal or hose․ Verify that the landing gear is properly engaged, ensuring that the jacks are securely in contact with the ground․ If you suspect a malfunction with the control panel, carefully review the system’s wiring diagram and check for any loose connections or damaged wires․ In the event of a persistent problem, it is advisable to consult with a trained professional for further assistance․ Lippert provides comprehensive support documentation and resources, including troubleshooting guides and videos, to help users diagnose and resolve common issues․
Technical Information
The Lippert 6 Point Leveling System is a sophisticated piece of engineering designed to enhance the stability and comfort of your RV․ It utilizes a combination of hydraulic jacks, sensors, and a control panel to automatically level your RV on uneven surfaces․ The system employs a series of heavy-duty jacks with individual drive motors, driven by hydraulic power․ These jacks are strategically positioned to provide a stable and level foundation for your RV․ The system utilizes level sensing electronics to determine the orientation of your RV․ These sensors communicate with the control panel, which then directs the jacks to extend or retract as needed to achieve a level position․ Lippert’s Technical Information section provides detailed specifications and wiring diagrams for the 6 Point System, enabling users to understand its components and functionality․ The system’s electrical requirements and operating parameters are clearly outlined in the documentation․ The provided diagrams illustrate the interconnection of the system’s components, facilitating troubleshooting and maintenance․
Lippert Components
The Lippert 6 Point Leveling System is comprised of a range of high-quality components designed for durability and reliable operation․ The system’s foundation is built upon robust landing gear jacks, engineered to withstand the stresses of frequent use and varying terrain․ These jacks feature a 9-inch diameter (63․5 square inch) shoe, mounted on a ball swivel for maximum surface contact and stability․ Lippert also offers an optional 12-inch diameter (113 square inch) shoe for demanding applications․ The Level-Up system relies on a sophisticated control panel, equipped with a user-friendly interface for intuitive operation․ This panel houses the system’s electronics, which manage the operation of the jacks, sensors, and hydraulic power unit․ The control panel allows users to select between automatic and manual leveling modes, providing flexibility in various situations․ Lippert’s commitment to quality extends to the system’s hydraulic power unit, which efficiently drives the jacks․ The power unit is engineered for reliable performance and designed to handle the demands of leveling your RV․